1. i2SOM湃兔核首页
  2. 产品服务
  3. 开发套件
i2X-MP15X开发套件
  • i2X-MP15X开发套件

i2X-MP15X开发套件

芯片平台: ST STM32MP1
  • 概述
  • 订购选型
  • 软件资源
  • 硬件参数
  • 配件模块
  • 开发资料

i2X-MP15X开发套件是湃兔核面向工控和嵌入式产品提供的功能评估和测试的解决方案平台。i2X-MP15X开发套件有两部分组成，i2S-MP15x核心板和i2C-MP15X-B底板。

i2S-MP15x核心板基于ST（意法半导体）公司的STM32MP1系列微处理器设计的系统模块。选用处理器型号为STM32MP157AAA3，此型号处理器采用两个ARM Cortex-A7核心和一个ARM Cortex-M4协处理器，提供更优秀的多媒体能力和实时处理能力。

i2C-MP15X-B底板支持安装i2S-MP15x系列核心板，同时对核心板引出的信号，实现为特定的功能接口。底板集成了以太网、RGB LCD、USB OTG、USB Host、RS232、RS485、CAN、音频、4G模块、WiFi等丰富的功能或接口，可满足大部分工业应用场合、物联网、便携式消费电子、汽车电子等多个行业。

特点

  • 底板支持i2S-MP15x系列核心板
    • 采用ST STM32MP1系列处理器
    • 双核ARM® Cortex®-A7核心，主频高达650Mhz
    • 协处理器ARM® Cortex®-M4核心，主频高达209MHz 
    • 3D GPU Vivante® OpenGL ES 2.0
    • 内存最大可支持1GByte
    • 存储器支持NAND Flash或eMMC Flash
  • 支持多种启动方式，SD Card、eMMC、QSPI Flash
  • 双以太网，1x 1000Mbps，1x 100 Mbps
  • 多种显示接口，MIPI-DSI(2-lane)和并行RGB
  • 支持Mini PCI-E接口的4G模块
  • 支持WiFi 2.4GHz IEEE 802.11a/b/g/n
  • 支持Bluetooth V4.0
  • 支持TIM1高级定时器的完整信号
  • 支持2路16 bit ADC输入信号
  • 支持2路12 bit DAC输出信号
  • 支持常用的工业通信信号，RS232、RS485、FDCAN等
  • 支持常用的外设通信信号，I2C、SPI、串口TTL

采用ST STM32MP1系列多核异构处理器

i2S-MP15X核心板配备的ST STM32MP157处理器，属于异构多核处理器。包含了两个主频高达650Mhz的ARM Cortex-A7核心和一个主频高达209Mhz的ARM Cortex-M4核心 ，不仅为Linux提供了强大的性能，还为实时任务处理提供更优秀的解决方案。

产品细节展示

i2X-MP15X开发套件
i2X-MP15X 开发套件正面图
i2X-MP15X开发套件
i2X-MP15X 开发套件背面图

应用方向

  • 工业HMI设备
  • 智能楼宇控制、门禁、家庭智能控制
  • 医疗辅助设备
  • 集中控制单元、工业网关、数据采集单元，IoT网关
  • 智能能源管理系统
  • 工厂自动化控制设备
  • 边缘计算
  • 电机控制
产品型号核心板型号核心板内存容量核心板存储器容量开发套件规格底板型号订购链接
i2X-MP157AB06I-D512E4i2S-MP157AB06I-D512E4DDR3L 512MByteeMMC 4GByte工业级i2C-MP15X-B点击购买

遵循开源Linux开发规范，轻快、稳定的同时，更自由、更简洁、功能更丰富。

PanGu开发板提供丰富的开发体验，支持多种语言，如Python、Rust、Golang、C\C++。

支持Qt图形应用开发，并且提供完整工具链支持集成至QtCreator可视化开发工具，让图形开发不再难于登天。

操作系统支持

  • Debian Jessie
  • 基于Yocto Linux构建的Qt5图形系统
  • 基于Yocto Linux构建的Weston图形系统

软件资源

类别名称描述信息提供源码
引导程序TF-A用于Trusted mode的FSBL
U-Boot用于Trusted mode的SSBL。
用于Basic mode的FSBL和SSBL。
Linux内核Linux 4.19.9基于官⽅Linux 4.19.9版本
设备驱动USB HostUSB Host驱动
USB OTGUSB OTG驱动
I2CI2C总线驱动
Ethernet10/100/1000 Mbps以太⽹驱动
Audo音频驱动
MMCMMC/eMMC/TF卡存储驱动
LCDRGB显示驱动，⽀持4⼨和7⼨液晶屏
HDMIHDMI显示驱动
MIPI MIPI显示驱动，⽀持4⼨和7⼨液晶屏
RTC实时时钟驱动
Touch Panel四线电阻触摸
UART/USART串⼝驱动，支持RS232、RS485
LED GPIO LED驱动
KEY GPIO KEY驱动
ADC 模拟转数字控制器
SPI SPI总线控制器
Timer定时器
文件系统Debian rootfs基于Debian构建带X11的⽂件 系统
Yotcto rootfs基于Yocto构建带Qt的⽂ 件系统
Yotcto rootfs基于Yocto构建支持Weston图形系统的⽂件系统

功能框图

i2X-MP15X开发套件

板载功能

i2X-MP15X开发套件
i2X-MP15X 接口图
  • 网络功能
    • 2个以太网接口
      • 1x 10/100/1000 Mbps
      • 1x 10/100 Mbps
    • 支持Mini PCI-E接口的4G模块
    • WiFi 2.4GHz
    • Bluetooth V4.0
  • USB功能
    • 2x USB 2.0 Host
    • 1x USB 2.0 OTG (Device mode)
  • 显示功能
    • LCD 模块FPC座子：RGB 16bit，支持电容屏和四线电阻屏信号
    • MIPI显示接口
  • 视频采集功能：8bit 并行Camera接口(DVP)
  • 电源：12V DC 2pin凤凰端子
  • 1个Micro SD卡座
  • 设备启动选择开关：支持eMMC、SD Card、QSPI Flash设备的启动
  • 工业通讯接口
    • 2x CAN
    • RS232
    • RS485
  • 外设通信接口
    • I2C
    • SPI
    • TTL
  • 高级特性
    • TIM1高级定时器的完整信号
    • RTC备份电池
  • 串口调试接口

电气规格

输入电压：12V

输入电流：2A

机械规格

  • 机械尺寸(W x L x H)：168 x 103 x 23mm

环境与可靠性

  • 工作温度：工业级，-40° C ~ 85° C
  • 工作湿度：5% ~ 95%，无凝露

PanGu开发板支持的配件模块

i2X-MP15X开发套件

i2M-LCD070 液晶显示模块

  • 液晶尺寸7 Inch，分辨率1024×600
  • 电容触摸屏
i2X-MP15X开发套件

i2M-LCD043 液晶显示模块

  • 4.3 Inch，800×480
  • 电容触摸

上一个：

相关产品

i2X-MP15X Development Kit
  • i2X-MP15X Development Kit

i2X-MP15X Development Kit

  • Introduction
  • Ordering
  • Software
  • Hardware
  • Accessories
  • Development Resource

The i2X-MP15X Development Kit is a solution platform for functional evaluation and testing for industrial control and embedded products. i2X-MP15X Development Kit consists of two parts, i2S-MP15x core board and i2C-MP15X-B base board.

The i2S-MP15x is a system on module designed by ST’s STM32MP1 series of microprocessors. The selected processor model is STM32MP157AAA3, which uses ARM dual Cortex-A7 core and Cortex-M4 co-processor to provide better multimedia and real-time processing power.

i2C-MP15X底板不仅可以支持i2S-MP15x系列核心板，同时对核心板引出的信号，实现为特定的功能接口。底板集成了以太网、RGB LCD、USB OTG、USB Host、RS232、RS485、CAN、音频、4G模块、WiFi等丰富的功能或接口，可满足大部分工业应用场合、物联网、便携式消费电子、汽车电子等多个行业。

The i2C-MP15X backplane not only supports the i2S-MP15x series core board, but also implements a specific functional interface for the signals led from the core board. The chassis is integrated with Ethernet, RGB LCD, USB OTG, USB Host, RS232, RS485, CAN, audio, 4G module, WiFi and other rich functions or interfaces to meet most industrial applications, Internet of Things, portable consumer electronics, automotive electronics and other industries.

Features

  • Carrier board supports i2S-MP15x series SOM
    • ST STM32MP1 series processor
    • 2x ARM® dual Cortex®-A7, up to 650Mhz
    • 1x ARM® Cortex®-M4, up to 209MHz
    • 3D GPU Vivante® OpenGL ES 2.0
    • Memory support up to 1GByte
    • Storage supports NAND Flash or eMMC Flash
  • Supports multiple boot methods, SD Card, eMMC, QSPI Flash
  • Dual Ethernet, 1x 1000Mbps, 1x 100 Mbps
  • Multiple display interfaces, MIPI-DSI(2-lane) and parallel RGB
  • 4G module supporting Mini PCI-E interface
  • Support WiFi 2.4GHz IEEE 802.11a/b/g/n
  • Support Bluetooth
  • Full signal support for TIM1 advanced timer
  • Supports 2x 16-bit ADC input signals
  • Supports 2x 12-bit DAC output signals
  • Support common industrial communication signals, RS232, RS485, CAN, etc
  • Support common peripheral communication signals, I2C, SPI, serial TTL

Dual-core Cortex-A7 core processor with ST

i2X-MP15X开发套件使用ST STM32MP157处理器，属于异构双核处理器。包含了ARM双核 Cortex-A7核心处理器和Cortex-M4核心协处理器 ，提供更优秀的多媒体能力和实时处理能力。

Product Details

i2X-MP15X Development Kit
i2X-MP15X DevelopmentKit Front
i2X-MP15X Development Kit
i2X-MP15X DevelopmentKit Back

Application Field

  • Industrial HMI equipment
  • Intelligent building control, access control, home intelligent control
  • Medical aids
  • Centralized Control Unit, Industrial Gateway, Data Acquisition Unit, IoT Gateway
  • Smart Energy Management System
  • Factory automation
  • Edge computing
  • Motor control
Product ModelSOM modelRAM of SOMFlash of SOMOperating TemperatureCarrier BoardPurchase link
i2X-MP157AB06I-D512E4i2S-MP157AB06I-D512E4DDR3L 512MByteeMMC 4GByteIndustrial gradei2C-MP15X-BBuy

Follow the open source Linux development specifications, lightning fast, stable at the same time, more free, more concise, more feature-rich .

The i2S-MP15x core board provides a rich development experience and supports multiple languages such as Python, Rust, Golang, C\C++.

Supports Qt graphics application development and provides a complete toolchain to support integration with QtCreator visual development tools, making graphics development a no-brainer.

Operating System Support

  • Debian Jessie
  • Qt5 with Yocto Linux
  • Weston with Yocto Linux

Linux driver support

CategoryNameDescriptionSupport Source
BootloaderTF-AThe first stage bootloader for i2S-MP15x with trusted mode
U-BootIt's can be used for FSBL(basic mode) or SSBL(trusted mode)
Linux kernelLinux 4.19.9Based on official Linux version 4.19.9
Device driverUSB HostUSB Host
USB OTGUSB OTG, supports host and device mode
I2CI2C controller
Ethernet10/100/1000 Mbps ethernet driver
AudoInclude I2S controller and audio codec driver
MMCMMC/eMMC/TF Card
LCDRGB display controller, supports 4.3inch and 7inch LCD
HDMIHDMI converter driver
MIPI MIPI display driver
RTCReal time clock driver
Touch PanelFour wires resistive touch panel
USARTserial port driver
LED GPIO LED
KEY GPIO KEY
ADC input analog signal and output digital data to system
DACtake digital data and output analog signal
SPI SPI controller
PWMSet the period and duty cycle and output the corresponding waveform
FilesystemDebian rootfsThe file system with X11 desktop environment with Debian
Yotcto rootfsThe file system with Qt based on Yocto
Yotcto rootfsThe file system with Weston based on Yocto

Function Diagram

i2X-MP15X Development Kit

Peripheral Interface

i2X-MP15X Development Kit
Function Diagram
  • Network
    • 2x Ethernet
      • 1x 10/100/1000 Mbps
      • 1x 10/100 Mbps
    • 4G module supporting Mini PCI-E interface
    • Support WiFi 2.4GHz
    • Support Bluetooth
  • USB
    • 2x USB 2.0 Host
    • 1x USB 2.0 OTG (Device mode)
  • Display
    • LCD FPC: RGB 16bit, supports both capacitive and 4-wire resistive screen signals
    • MIPI display interface
  • Video Capture: 8bit Parallel Camera interface(TVP)
  • Power Jack: 12V DC 2pin Phoenix Terminal
  • 1x Micro SD slot
  • Boot switch DIP: supports eMMC、SD Card、QSPI Flash boot
  • Industrial Communication Interface
    • 2x CAN
    • RS232
    • RS485
  • Peripheral communication interface
    • I2C
    • SPI
    • TTL
  • Advanced Features
    • Complete signal for TIM1 advanced timer
    • RTC Backup Battery
  • Serial Debug Interface: TTL level

Electrical Specifications

  • Supply Voltage: 12V

Mechanical Specifications

  • Dimensions(W x L x H):

Environmental and Reliability

  • Operation temperature: Industrial, -40° C ~ 85° C
  • Relative humidity:

i2X-MP15X Development Kit

i2M-LCD070 display module

  • 7 Inch, resolution 1024×600
  • Capacitive Touch
i2X-MP15X Development Kit

i2M-LCD070 display module

  • 7 Inch, resolution 1024×600
  • Capacitive Touch

Documents

上一个：

相关新闻

电话
邮箱
QQ
地图