i2M-GiantAxe扩展板
  • i2M-GiantAxe扩展板
  • 产品介绍
  • 硬件资源
  • 支持开发板
  • 开发资料

i2M-GiantAxe扩展板是湃兔核公司专为PanGu开发板设计的功能扩展板。i2M-GiantAxe扩展板通过80pin 板对板公座连接器,可以直接安装在PanGu开发板底面的板对板母座连接器。扩展板提供了各种常用的功能接口和信号,为开发者实现各种应用功能提供了基础设施。

特性

  • 80pin 板对板公座连接器
  • 支持MiniPCI-E接口的4G模块
  • 支持WiFi 和蓝牙功能
  • 支持TIM1高级定时器的信号
  • 支持常用工业通信总线,RS232,RS485,CAN
  • 支持常用外设通讯总线,SPI、I2C、UART
  • ADC信号
  • 若干GPIO信号

产品图片

i2M-GiantAxe扩展板
i2M-GiantAxe 正面
i2M-GiantAxe扩展板
i2M-GiantAxe 背面
i2M-GiantAxe扩展板
i2M-GiantAxe 侧面

功能接口

i2M-GiantAxe扩展板
i2M-GiantAxe 功能接口
  • 一个可安装4G模块的Mini PCI-E连接器
  • WiFi 2.4Ghz
  • Bluetooth
  • Timer1完整的信号
  • 1路SPI信号
  • 1路I2C信号
  • 1路串口TTL电平信号
  • 两路ADC输入信号,ANA0和ANA1
  • 1路串口RS485电平信号
  • 1路串口RS232电平信号
  • 1路CAN信号
  • 14路GPIO信号

机械规格

  • 机械尺寸(W x L x H):

环境与可靠性

  • 工作温度:

文档资源 http://wiki.i2som.com/pages/viewpage.action?pageId=29655755

相关产品

i2M-GiantAxeboard

  • Introduction
  • Hardware Resource
  • Compatible Boards
  • Development Resource

The i2M-GiantAxe expansion board is a functional expansion board designed for PanGu development board. i2M-GiantAxe expansion board can be installed directly on the bottom of PanGu development board through 80pin board-to-board male connector. Expansion boards provide a variety of commonly used functional interfaces and signals that provide the infrastructure for developers to implement a variety of application functions.

Features

  • 80pin BtB male connector
  • Support 4G module
  • Support WiFi and Bluetooth
  • Support full signal of TIM1 advanced timer
  • Support common industrial communication bus, RS232, RS485, CAN
  • Support common peripheral communication bus, SPI, I2C, UART
  • Support two ADC input signal
  • Several GPIO signals

Product detail

i2M-GiantAxeboard
i2M-GiantAxe Front
i2M-GiantAxeboard
i2M-GiantAxe Back
i2M-GiantAxeboard
i2M-GiantAxe Side

Function Interface

i2M-GiantAxeboard
Function Diagram
  • U5: A Mini PCI-E connector for 4G module
  • U4: WiFi 2.4Ghz and Bluetooth
  • J26: Full signal of Timer1
  • J23: 1x SPI controller
  • J21: 1x I2C controller
  • J20: 1x Serial signal (TTL level)
  • J11: 2x ADC input signal(ANA0 and ANA1)
  • J3: 1x RS485
  • J2: 1x RS232
  • J4: 1x CAN
  • J22: 16x GPIOs

Document Resource http://wiki.i2som.com/pages/viewpage.action?pageId=29655755

相关新闻