- Introduction
- Ordering
- Software
- Hardware
- Accessories
- Development Resource
The i2X-MP15X Development Kit is a solution platform for functional evaluation and testing for industrial control and embedded products. i2X-MP15X Development Kit consists of two parts, i2S-MP15x core board and i2C-MP15X-B base board.
The i2S-MP15x is a system on module designed by ST’s STM32MP1 series of microprocessors. The selected processor model is STM32MP157AAA3, which uses ARM dual Cortex-A7 core and Cortex-M4 co-processor to provide better multimedia and real-time processing power.
i2C-MP15X底板不仅可以支持i2S-MP15x系列核心板，同时对核心板引出的信号，实现为特定的功能接口。底板集成了以太网、RGB LCD、USB OTG、USB Host、RS232、RS485、CAN、音频、4G模块、WiFi等丰富的功能或接口，可满足大部分工业应用场合、物联网、便携式消费电子、汽车电子等多个行业。
The i2C-MP15X backplane not only supports the i2S-MP15x series core board, but also implements a specific functional interface for the signals led from the core board. The chassis is integrated with Ethernet, RGB LCD, USB OTG, USB Host, RS232, RS485, CAN, audio, 4G module, WiFi and other rich functions or interfaces to meet most industrial applications, Internet of Things, portable consumer electronics, automotive electronics and other industries.
Features
- Carrier board supports i2S-MP15x series SOM
- ST STM32MP1 series processor
- 2x ARM® dual Cortex®-A7, up to 650Mhz
- 1x ARM® Cortex®-M4, up to 209MHz
- 3D GPU Vivante® OpenGL ES 2.0
- Memory support up to 1GByte
- Storage supports NAND Flash or eMMC Flash
- Supports multiple boot methods, SD Card, eMMC, QSPI Flash
- Dual Ethernet, 1x 1000Mbps, 1x 100 Mbps
- Multiple display interfaces, MIPI-DSI(2-lane) and parallel RGB
- 4G module supporting Mini PCI-E interface
- Support WiFi 2.4GHz IEEE 802.11a/b/g/n
- Support Bluetooth
- Full signal support for TIM1 advanced timer
- Supports 2x 16-bit ADC input signals
- Supports 2x 12-bit DAC output signals
- Support common industrial communication signals, RS232, RS485, CAN, etc
- Support common peripheral communication signals, I2C, SPI, serial TTL
Dual-core Cortex-A7 core processor with ST
i2X-MP15X开发套件使用ST STM32MP157处理器，属于异构双核处理器。包含了ARM双核 Cortex-A7核心处理器和Cortex-M4核心协处理器 ，提供更优秀的多媒体能力和实时处理能力。
Product Details
Application Field
- Industrial HMI equipment
- Intelligent building control, access control, home intelligent control
- Medical aids
- Centralized Control Unit, Industrial Gateway, Data Acquisition Unit, IoT Gateway
- Smart Energy Management System
- Factory automation
- Edge computing
- Motor control
| Product Model | SOM model | RAM of SOM | Flash of SOM | Operating Temperature | Carrier Board | Purchase link |
|---|---|---|---|---|---|---|
| i2X-MP157AB06I-D512E4 | i2S-MP157AB06I-D512E4 | DDR3L 512MByte | eMMC 4GByte | Industrial grade | i2C-MP15X-B | Buy |
Follow the open source Linux development specifications, lightning fast, stable at the same time, more free, more concise, more feature-rich .
The i2S-MP15x core board provides a rich development experience and supports multiple languages such as Python, Rust, Golang, C\C++.
Supports Qt graphics application development and provides a complete toolchain to support integration with QtCreator visual development tools, making graphics development a no-brainer.
Operating System Support
- Debian Jessie
- Qt5 with Yocto Linux
- Weston with Yocto Linux
Linux driver support
| Category | Name | Description | Support Source |
|---|---|---|---|
| Bootloader | TF-A | The first stage bootloader for i2S-MP15x with trusted mode | |
| U-Boot | It's can be used for FSBL(basic mode) or SSBL(trusted mode) | ||
| Linux kernel | Linux 4.19.9 | Based on official Linux version 4.19.9 | |
| Device driver | USB Host | USB Host | |
| USB OTG | USB OTG, supports host and device mode | ||
| I2C | I2C controller | ||
| Ethernet | 10/100/1000 Mbps ethernet driver | ||
| Audo | Include I2S controller and audio codec driver | ||
| MMC | MMC/eMMC/TF Card | ||
| LCD | RGB display controller, supports 4.3inch and 7inch LCD | ||
| HDMI | HDMI converter driver | ||
| MIPI | MIPI display driver | ||
| RTC | Real time clock driver | ||
| Touch Panel | Four wires resistive touch panel | ||
| USART | serial port driver | ||
| LED | GPIO LED | ||
| KEY | GPIO KEY | ||
| ADC | input analog signal and output digital data to system | ||
| DAC | take digital data and output analog signal | ||
| SPI | SPI controller | ||
| PWM | Set the period and duty cycle and output the corresponding waveform | ||
| Filesystem | Debian rootfs | The file system with X11 desktop environment with Debian | |
| Yotcto rootfs | The file system with Qt based on Yocto | ||
| Yotcto rootfs | The file system with Weston based on Yocto | ||
Function Diagram
Peripheral Interface
- Network
- 2x Ethernet
- 1x 10/100/1000 Mbps
- 1x 10/100 Mbps
- 4G module supporting Mini PCI-E interface
- Support WiFi 2.4GHz
- Support Bluetooth
- 2x Ethernet
- USB
- 2x USB 2.0 Host
- 1x USB 2.0 OTG (Device mode)
- Display
- LCD FPC: RGB 16bit, supports both capacitive and 4-wire resistive screen signals
- MIPI display interface
- Video Capture: 8bit Parallel Camera interface(TVP)
- Power Jack: 12V DC 2pin Phoenix Terminal
- 1x Micro SD slot
- Boot switch DIP: supports eMMC、SD Card、QSPI Flash boot
- Industrial Communication Interface
- 2x CAN
- RS232
- RS485
- Peripheral communication interface
- I2C
- SPI
- TTL
- Advanced Features
- Complete signal for TIM1 advanced timer
- RTC Backup Battery
- Serial Debug Interface: TTL level
Electrical Specifications
- Supply Voltage: 12V
Mechanical Specifications
- Dimensions(W x L x H):
Environmental and Reliability
- Operation temperature: Industrial, -40° C ~ 85° C
- Relative humidity:
- 7 Inch, resolution 1024×600
- Capacitive Touch
- 7 Inch, resolution 1024×600
- Capacitive Touch
Documents
- i2X-MP15X-B development kit documents http://wiki.i2som.com/pages/viewpage.action?pageId=25919499
- i2S-MP15x SOM manual
