PanGu Board

PanGu Board

  • Introduction
  • Order detail
  • Software Resource
  • Hardware parameter
  • Accessories
  • Development Resource

PanGu Board is a single-board computer based on the STMicroelectronics STM32MP1 series processor launched by Xi’an i2SOM Tech. The PanGu Board uses the processor model STM32MP157AAA3. This model uses ARM dual-core Cortex-A7 core and Cortex-M4 coprocessor to provide better multimedia capabilities and real-time processing capabilities. The PanGu Board integrates HDMI, Ethernet, LCD, USB OTG, USB Host, TF Card, audio and other rich interfaces in an area of ​​70×105.5mm to meet most industrial applications, Internet of Things, portable consumer electronics. , automotive electronics and other industries.

PanGu Board

Features

  • Using ST STM32MP1 series processor
    • 650MHz ARM® dual Cortex®-A7
    • 209MHz ARM® Cortex®-M4
  • 3D GPU OpenGL ES 2.0
  • Mullti display interface, HDMI/MIPI/RGB-LCD
  • 2x CAN FD

Using ST dual Cortex-A7 processor

The PanGu board use ST STM32MP157 processor. It has dual Cortex-A7 and a Cortex-M4 coprocessor, Provide better multimedia capabilities and real-time processing capabilities.

Interfaces

PanGu Board

 

Targeted Applications

  • Industrial HMI device
  • Intelligent building control, access control, home intelligence control
  • Health device
  • Centralized control unit, industrial gateway, data acquisition unit, IoT gateway

 

 

Product ModelCPURAMFlashSpecificationOrdering
PanGu-MP157AD512E4CSTM32MP157AAA3DDR3L 512MByteeMMC 4GByteCommericialPurchase

Following the open source Linux development specification, it is lighter, more stable, more free, simpler, and more feature-rich.

The PanGu board provides a rich development experience and supports multiple languages such as Python, Rust, Golang, C\C++.

Support Qt graphics application development, and provide complete toolchain support integration into QtCreator visual development tools, making graphics development no longer difficult.

Operating System

  • Debian  Jessie
  • Yocto Linux

Driver support

CategoryNameDescriptionSource
BootloaderSPLThe first stage bootloader for PanGu board
U-BootThe second stage bootloader for PanGu board
Linux kernelLinux 4.19.9Based on official version Linux 4.19.9
Device driverUSB HostUSB 2.0 Host controller and PHY
USB OTGUSB 2.0 OTG controller and PHY
I2CI2C controller
Ethernet10/100/1000 Mbps MDIO controller and PHY driver
AudoI2S controller and CS42L51 codec driver
MMCMMC/eMMC/SDIO controller
LCDRGB LCD controller, support 7 inch TFT LCD
HDMIHDMI driver
MIPI MIPI controller, support 7inch LCD
RTCReal time driver
Touch Panel4-wire resistive panel and capacity panel
USART/UARTserial port driver
LED GPIO LED driver
KEY GPIO KEY driver
ADC Anlog to digital driver
SPI SPI controller
File systemDebian rootfsThe system based on Debian with LXDE.
Yotcto rootfsThe system based on Yocto with Qt framework.
Yotcto rootfsThe system based on Yocto with Wayland.

Function Diagram

PanGuBoard-FunctionDia

Product Features

  • MPU
    • dual Cortex-A7, 650MHz
    • Cortex-M4, 209Mhz
    • 3D GPU
  • Flash & Memory
    • 16bit DDR3L, up to 1GByte
    • 8bit eMMC Flash
    • Quad-SPI NOR Flash
    • support Mciro SD
  • Audio
    • 3.5mm stereo headphone jack
    • support microphone input
  • Display
    • Parallel RGB LCD interface, the resolution up to WXGA (1366x768)
    • MIPI DSI interface
    • support for resistive and capacitive touch panel
    • HDMI Type A connector, include audio output
  • USB
    • 1x USB 2.0 OTG, support device and host mode, using Micro Type-AB connector
    • 2x USB Host,Type-A  connector
  • Camera
    • 8Bit parallel camera interface
  • LEDs
    • 1 x red LED for system power
    • 2 x blue LED for user
  • KEYs
    • 1 x KEY for system reset
    • 1 x KEY for user
  • Debug
    • support JTAG/SWD port
    • support TTL debug port
  • Power
    • DC 5V, support USB or 3.81mm terminal block supply
    • support using CR1225 as backup batttary
  • PCB Size (W x L )
    • 105.5mm x 70mm
  • Extension 
    • 80pin Board to Botard connector
    • 30pin 2.0MM Pin
    • support GPIO/I2C/SPI/CAN/TIM/UART/SDIO/ADC/USB/FMC

Mechanical dimensions

Size: 105.5 x 70x 6.5 mm

PCB specifications: lead-free immersion gold process, matte black ink


Allegro

Power consumption

Parameter

Symbol

Specification

Remark

Min.

Typ.

Max.

Unit

Supply voltage

VIN

4.7

5

5.3

V


Supply current

IIN

---

0.25

---

A

Debain login screen

Voltage

VBAT

2.4

---

3.6

V

 

RTC current

IBAT

---

---

3

uA

 

Packing

  • PanGu SBC x 1
  • Electrostatic packaging bag x 1
  • Packing box x 1

 

Display Screen

i2M-LCD070C Capacitive screen 


2019062302223712

 

Resource

Please visit our wiki site to get more detail documents.

http://wiki.i2som.com/

Contact Us

029-88630372

技术咨询:support@i2som.tech

商务合作:market@i2som.tech

工作时间:周一至周五,9:30-18:30,节假日休息